EZ Flares

From 39.99

The original EZ Flares design provides optimal performance and durability for an affordable price. Quality 3M automotive tape easily endures all environment conditions, car washes and high speeds. Extends fender by up to 1 inch.

SKU: N/A Tag:


The original EZ Flares design provides optimal performance and durability for an affordable price. Quality 3M automotive tape easily endures all environment conditions, car washes and high speeds.

  • Universal Fit – one-size-fits-all
  • Extends your fenders by up to 1 inch
  • Designed protect your paint from dirt, grime and scratches
  • No drilling or screws required
  • Quick 3-step installation
  • Made in USA
  • One unit enough for two fenders

Additional information

Weight 1.9 lbs

EPDM Foam Rubber


10.5 feet (320 cm)

Important Information:

Please measure your vehicle before ordering to ensure EZ Flares length is sufficient for your vehicle.

49 reviews for EZ Flares

  1. 5 out of 5

    Working %100 fit perfectly, love it so much

  2. 5 out of 5

    I actually got these for my husband’s aunt. I knew she was buying one at a time so she could afford them. She is very happy now that she has all 4 she needed.

  3. 5 out of 5

    They are easy to apply and look great – a very good value.

  4. 5 out of 5

    Fit perfectly, You cant go wrong with this product.

  5. 5 out of 5

    Super easy to install and they look great on my truck.

  6. 4 out of 5

    These look great on my truck. Heat up rubber with hair dryer before applying. Makes them better!

  7. 5 out of 5

    I finally had a chance to install these on my ‘93 pickup. They were very easy to install & also looks asthetically pleasing. Will purchase again in the future.

  8. 3 out of 5

    Decent short term, one part fell off the back already and one side is partially coming off, snow clumps sticks to it Some and I think that weight and/ or being hit with snow/wind knocked them lose, seemed to go on fairly well. Thick rubber but pretty flexible but solid. Probably not best for mudding or anything. Decent for short fix looked good while lasted.

  9. 4 out of 5

    They are overall a decent product. $40 per 8.5 ft is a bit pricy though considering almost every vehicle will require more than that. But it beats $300 Bushwackers…

    The application was easy enough, And the tape sticks strongly. Helped bring the look of the truck together a bit more. As another user mentioned, it is more foam than rubber and is not formable.

    This is a good alternative to name brand flares, but you get what you pay for.

  10. 5 out of 5

    Bought 2 rolls and fell short, I have a Mercedes w164 and 2 rolls isnt enough just ordered 2 more looks great and if you don’t like them down the road just peel them off, no paint damage or scratches and no drill holes!

  11. 5 out of 5

    They are just stick on and work as intended. Its almost like a sturdy foam. But don’t let that get you down it works out great. For the price you can easily replace them if something ever did go wrong and the glue is similar to like 3m tape so you would really need to be rough. If your reading this give it a try you won’t be disappointed and it cheap so nothing wrong with taking a chance. Will add photos at a later time.

  12. 5 out of 5

    I had serious doubt about these flares, but I was wrong. These things look great! I added some tire shine to them and it compliments the wheels very well.

  13. 4 out of 5

    Product was packaged well and shipped fast. Easy to install. Just wonder how long the glue will hold out ? Also wish the flare was a bit stiffer. But overall a great product ! Thanks EZflare.

  14. 5 out of 5

    These are very subtle but add that ‘finishing touch’ to look polished and classy, nothing crazy like big old things I see on jacked up trucks, and just what I was looking for! I put them on in July myself and still perfect in December with everyday farm use and nastiness.

  15. 5 out of 5

    Very easy to install. Bought 2 sets to do the front an back of my 2017 Silverado. The adhesive is strong went through two car washes and no issues. Follow installation instructions and will have no issues.

  16. 4 out of 5

    These fit well and are extremely flexible around the fender opening. They are easy to trim to size and stick well. They look good, too.

  17. 3 out of 5

    Sticky, but they don’t flare out very far to serve a practical purpose.
    Just makes your vehicle look cool.

  18. 5 out of 5

    They are good quality, easy to install, ideal length, looks great, but need more than double face glue to hold properly

  19. 5 out of 5

    A great alternative for vehicles that companies don’t make flares for like my 2015 Chevy Traverse. Stands up to the abuses of car washes, vibrations, and the abuse of the trail when you’re off roading.

  20. 5 out of 5

    Easy to apply, looks good. Covers my 33″ for the next Inspection and will keep the car cleaner for the winter.
    I had to trim down the width on some of the sticky bit so it didn’t go on the plastic inner arches as well and sat flush on the painted outer ones.
    Prep / de-grease / dry properly and it sticks well.
    A good product, took minutes with the kitchen scissors.

  21. 3 out of 5

    Arrived on time and packaged well……will take time to try to install, I purchased fender clips to help secure it, I can’t see just tape holding it at highway speeds or in the mud and rocks.

  22. 5 out of 5

    My new wheels have an offset which extends them outside the car by about 1 inch. This is apparently against the law. Thus EZ Flares = easy solution. Thanks!

  23. 1 out of 5

    Not good. First off I think it looks very cheap on my 16 f150. 2nd there is only enough for 2 wheels. I will be returning this

  24. 5 out of 5

    Hi everyone.! Received my EZFLARES today !! After ordering the flares I received an email stating the wearhouse was a part of the Irma evacuation and this may potentially stall my order. Even in a hurricane this company was thinking of its customers. My order still showed in a timely fashion. If you are looking for a easy and inexpensive way to control the mud from ruining your cars paint job … this is it , installing can not get much easier. Also adds a special look to your vehicle.

  25. 5 out of 5

    EZ flares makes it very EZ to apply fender flares for the do-it-youselfer

  26. 4 out of 5

    This product was exactly what I wanted: an easy, relatively cheap alternative to traditional flares that require drilling. I do believe the price is really high for the quality you receive, however.

    – Easy and quick installation, very flexible material made it easy to line up with your fender
    – The car I bought these for (Corolla) has tricky uneven body work, like a ledge where the bumper and side of the body meet and it also has aluminum mud flaps bracketed to the fender. The flares easily formed around these obstacles and it’s hardly noticable.
    – End results look great!

    – Cheap material! It’s very foamy, not rubbery. The softness is a problem because my product arrived damaged with a large gouge to an area on the exposed outside ring of the coil. I had to cut that piece out. Makes me wonder how they will hold up to flying rocks on the highway, someone opening a door into them, etc.
    – Similarly, the packaging is awful and caused damage to both units I ordered. It comes in a coil not wrapped around a tube but rather coiled around itself, so the inside 8 inches or so are unusable because they are so bent up and crinkled. I also needed to cut this section out but even so I still had enough material to cover 2 fenders per roll.
    – Someone mentioned the raw foam edge that you get when cutting to taper to your car’s edges. Yes, there is porous foam (black) that will show, but it’s not actually a problem. Tip: seal the foam with Elmers glue, or if possible just keep running the flare further into the wheel well to taper seamlessly.

    I would recommend this product to someone like me with an older car/secondary car. Be wary of the quality because so far I’m not sure how long I trust these to stay pristine. No issues with the 3m tape; very reliable stuff!

  27. 4 out of 5

    This set of foam fender flares is working out great on my son’s truck. One set only fits two of the wheel wells, so we need to get another set to finish things off. The black, soft foam applies easily with a peel and stick adhesive and holds well to the underside of the vehicle wheel well. When you have it in place simply trim it to size with scissors, and then move on to the next. The fender flares are flexible and soft, but work well to help protect from flying rocks and paint chips. The fender flares add a great, finished look to the truck. They could be sturdier, and we will see how the sticky holds up, especially in our wet climate, but overall we are very pleased with these foam fender flares.

  28. 5 out of 5

    Simple easy install, took under an hour. Bought and used two kits, one per axle.

  29. 5 out of 5

    These tire flares are great. They were easy to put on & fit perfect. My car looks so nice now that my husband has put these flares on it. I’m very happy with them.

  30. 4 out of 5

    Looks and works great I have gotten lots of complaments and was easy to install.

  31. 4 out of 5

    Easy to install. Look great. The only reason for 4 stars is it took 4 rolls to do my 2015 1500 silverado. I was under the impression it would be one roll per axle.

  32. 5 out of 5

    product worked well for me.. easy to use. only issue was needed to reorder another set.. so make sure you get enough the first time around.

  33. 5 out of 5

    These fenders look very nice for what they are.
    It was my first time installing fenders on my jeep but these are very easy to install. It took me about 20 minutes to get these installed all the way around. Make sure to follow the instructions if you want them to stick!

  34. 5 out of 5

    I find theese a bit too soft for my taste. This aside an Ok product

  35. 5 out of 5

    When I got the package and opened it up, I felt as the EZ Flares was too flexible, and light duty, was hoping for something sturdier and stronger. I have it installed in my car for about 1-2 months, going through snow, cold temperatures, rain, car wash and power wash and still there and strong. Installation was easy.

  36. 5 out of 5

    Excellent product with great results. Installation took about 10 minutes total for all four fenders. Make sure to follow the installation instructions to get a good bond.

  37. 5 out of 5

    I installed the EZ Flares on my 1999 GMC Sonoma. I took only about 5 minutes to do all 4 wheel wells. Took a utility knife to cut them to size and contour as I was installing. Look great and have held up now thru rain and mud for about 2 months now.

  38. 4 out of 5

    The product is good, but it too soft and will vibrate when driving. Need more improving for customize to car.

  39. 2 out of 5

    Pretty unsatisfied. The idea is great, the product, not so much.

    I bought two of these 8.5ft flares to prevent my wide tires from flinging up gravel and debris into my beautiful paint.

    Upon receiving, I was surprised to find that “foam rubber” in the description was more foam than rubber. It has the same density as door seals and other types of sealing foam rubber. No way will this stand up for very long.

    Install was easy. The double sided tape stuck, the fact I didnt have to drill holes was one of the major reasons I went with this brand. I doubt the tape will hold for more than a year – it definitely wasn’t name brand stuff. The only tough part is keeping the flares in a straight line during application. That soft foam just isn’t rigid enough to keep a sharp alignment when installing.

    Trimming is easy with a sharp pair of kitchen shears. Be warned though, when you trim it, you will expose a nice patch of porous foam, which looks godawful if you are trying to taper the ends to match the curve of the fender. Lovely.

    I’m sure there’s better stuff out there. The idea is great, but the materials are not automotive grade. It looks hokey. Hopefully they do the job, if not, it’s easy to rip them off I suppose.

  40. Post
    5 out of 5

    Few wheel flare options exist for the Wife’s X1, these looks good, easy to install, we’ll see how well they hold up. Especially through Winter.

  41. Post
    5 out of 5

    I was very pleased with how the flares fit, they look almost factory, and the adhesive stuck well.
    Just a note about surface prep before applying though, clean and dry it very carefully, I used alcohol, and it stuck very well, I feel like it would probably rip apart before it came unstuck, very secure!
    I did have one section come unstuck, but it wasn’t properly cleaned, and I was able to restick that section with double sided tape, therefore it wasn’t a fault of the product.

    I do feel that they are a bit overpriced, as I needed two sets, and at just over $60, that’s not cheap. They are made well, but seem to be a foam type rubber, and I’m curious to see how they look after a couple of years of sunlight, dirt and temperature extremes.

    Overall they do the job quite well, and I’m very pleased!

  42. 4 out of 5

    Is good product but could be cheaper

  43. 5 out of 5

    Easy to install, looks great and good quality material. Fast Shipping.

  44. 5 out of 5

    I have recently purchased EZ Flares rubberized fender flares for my 1991 gmc sonoma, I found the flexible rubber material to be very easy to work with and of very good quality, all that is needed is to peel off the strip that covers the area that sticks on to fender and press in place, as to the instructions add a little heat to the glued area for better adherence to the metal. A very sharp and neat looking product, should anyone be needing fender flares for their vehicle EZ Flares is the way to go, I will not hesitate to purchase more should I be needing them in the near future, Thank You EZ Flares:

Only logged in customers who have purchased this product may leave a review.